People usually put stickers on their cars to express their personality, advocacy, or political views. Sometimes stickers are even essential so that you can enter exclusive properties. But like anything else, the thoughts or ideas you put on your car through literally stickers can change. Unfortunately, removing stickers is time-consuming if you don’t want to leave a residue. Worse, if you’re not too careful, adhesive residue will be much more difficult to remove completely. If you’re having trouble removing decals from your vehicle, learn how to remove decals from cars!
How to remove glue with washing up liquid
Isn’t it great that while learning how to remove adhesive from cars, you suddenly realize that simple household products can be used? To be more precise, almost every household has a washing-up liquid to thoroughly clean dirty dishes. Amazingly, dish soap’s effectiveness doesn’t stop there. This type of soap can also be used to remove glue. Here are the steps to remove glue from cars with dish soap:
Scrape off the residue.
Since dish soap is one of the mildest substances when removing glue, you may find the process difficult. To have a higher chance of completely removing the adhesive from a glass surface like the car window, scrape off the residue first with a sharp razor blade. Do not use a dull blade as this is more likely to scratch the surface. At least with a sharp blade, the removal process will be faster.
Mix dish soap and hot water.
You should not use straight dish soap as it usually comes in the form of a really thick liquid. Because the glue is sticky, it absorbs heat and moisture better. The thick liquid simply glides over the residue.
What you need to do is thoroughly mix a bucket of hot water and a few drops of dish soap. This ratio works best for large decals on car windows. For smaller residues, use a bowl and an even smaller amount of dish soap – a drop is enough.
Rub off the residue with a rag.
Even the material needed to remove glue can be too basic. A rag is enough to rub the glue with the detergent mixture.
First, soak the rag in the soapy water. Then rub it directly over the sticky area. When you are satisfied that the surface is already 100% adhesive-free, dip another rag in clean water to wipe away any remaining residue. Then wipe the area dry with a clean cloth.
How to remove glue with fabric softener
Removing glue from your car can be a pleasant experience, especially when you use liquid fabric softener. Fabric softeners usually have that mesmerizing scent that you can’t stop smelling. However, this type of liquid, like dish soap, is too mild for just one try. Only use it as a secondary option if your first attempt fails to completely remove the adhesive. Check out these simple steps on how to use fabric softener to remove glue from cars:
Create a mix.
Make sure to mix hot water and fabric softener in a 50:50 ratio. Combine these two liquids together thoroughly.
Wipe off the glue.
Dip the rag in the mixture and simply wipe it over the sticky spot. Wait until the surface is free of glue.
How to remove glue with gasoline
Aside from its primary purpose of fueling vehicles, gasoline can also be used to remove glue. Check out the following tips for removing glue from cars with gasoline:
Find the right kind of rag.
To make finding the ideal rag easier, just use an old cotton t-shirt. However, for excellent absorption, it must be clean and soft. It must also be large enough to prevent your hand from getting dirty with gasoline.
Pour gasoline on the rag.
To ensure your hand stays clean, fold the rag into several layers. Also, you need to pour the liquid slowly. Do not use too much gasoline as you could damage your vehicle’s finish.
Rub all the glue with gasoline.
Make circular motions while rubbing the glue. Do it like washing your car. This step should only take a few minutes.
Wash off fuel residue.
Don’t let gasoline evaporate on the surface of your car. It can damage the paintwork or finish by corrosion. Gasoline is best washed off with warm, soapy water. Use two clean rags in this step: one for washing and the other for drying.
wash your hands
Afterwards, wash your hands thoroughly with soap and water to avoid Skin burns from gasoline. Or you can also use gloves throughout the process. However, do not use latex gloves as these react badly with gasoline.
How to remove glue with heat
Heat removal of adhesive is the safest method as no chemicals are required. The best tool to provide heat directly without moisture is the hair dryer. The following are ways you can use heat to remove adhesives from cars:
Wash the sticky area.
Using intense air from the hair dryer can cause abrasion if the affected area has dirt and debris. The air can forcefully remove small particles, which can lead to scratches. So you need to wash the area with soapy water before anything else.
Blow hot air on the sticky area.
Heat easily loosens the adhesive, making removal easier. Using a hair dryer, hot air is easily centered over the area. It only takes a few minutes to complete this particular process.
Scrape off excess glue.
If there is any residue, scrape it off with a plastic card. This should be easy now as the glue is already too loose thanks to the hot air from the hair dryer.
As a last resort, use tree sap remover.
Glue and tree sap are very similar to each other. Both are sticky and difficult to remove from cars. The tree sap remover is already our last resort if the heat does not completely dissolve the glue. It’s super safe to use, so you don’t have to worry about damaging your car’s finish. Just make sure you follow the product’s directions.
How to remove glue from cars
In summary, our car glue removal tips revolve around simple household products. Dish soap, fabric softener, gasoline and heat are all it takes to get rid of the sticky residue left behind after clumsy sticker removal.
For more cleaning tips, learn how to keep a black car clean!